The PB-05 is an automatic microphone gate unit which is based on the latest optical technology. The PB-05 is plugged between microphone and cable. It's equipped with an infrared sensor. The PB-05 senses if someone is in front of the microphone and will switch on the microphone. The distance can be adjusted between 15cm and 120cm with the help of a Trim Pot. The microphone will be switched off automatically if nobody is in front of it. A red status LED indicates if the microphone is switched on. The PB-05 works with 48 Volt phantom power. Condensor microphones can be used in connection with the PB-05. The phantom power passes the microphone. A small push button on the top allows the user to toggle between "Mic On" and "Optogate Enable". The PB-05 is ideal for lead and backing voval mics, acoustical instruments and talk back mics. The PB-05 ist the best and easiest solution for the most common problems in live applications. It eleminates unwanted backgound noise of other instruments into unused microphones on stage. So, the clarity of the mix and the dynamics will be increased due to less phase cancellation and backgound noise. It reduces the possibility of feedback from unused mics. Just plug & Play...

Physical dimensions:	69mm length x 35mm height x 21mm width
Connectors:	XLR 3-pin (1 = gnd, 2 = plus, 3 = minus)
Case construction:	Aircraft-aluminium, black galvanizedl
Distance:	Adjustable between 15 - 120 cm (depending of the type of reflection surface)
Angle:	+ / - 10 degrees
Switching noise:	Immeasurable
Frequency response:	0 Hz - 30kHz, - 3 dB in connection with 150 Ohm microphone impedance
Signal noise ratio:	-114 dB / -122 dB, Mic on / off with 150 Ohm Mic.
Distortion:	< 0,05 % with 100mV signal
Delaytime Mic on:	< 0 ,2 Seconds
Delaytime Mic off:	About 1 second (Other times on request)
Attenuation "mic on":	0 dB
Attenuation "mic off":	42 dB in connection with 150 Ohm microphone impedance
Usuable mic. types:	All type of dynamic - and phantom powered mics. up to 10 mA current consumption
Maximum input level:	3 dB (1.1V)
Operating temperature:	0 - 55 degrees Celsius
Background light range:	0 - 20000 Lux daylight and 0 - 12000 Lux electric bulblight
Distance measurement:	Active infrared reflection principle with 3 bit code
Power:	24-48 V Phantompower (passes phantompower to the microphone)
Current consumption:	Ca. 3.7 mA